聊城真空泵-吉玛泰克自动化-真空泵配件

带端子板的传感器盒

IP66聚苯i乙烯传感器盒。? 可定制的电缆进线和出线，真空泵生产厂家，配有标准电缆密封套。? 2个螺钉端子，可直接连接15个输入/输出 。? 随附铝挤压型材直接固定螺钉。? 每个连接线路的zui大开关电流达1A。

IP66 polystyrene sensor box.? Customizable cable input and output with standard cable gland

2 screw terminals with direct connection of 15 inputs/outputs. ? Supplied complete with direct fxing screws for aluminum extruded profles. 

Maximum switching current up to 1A for each connection line.

编程单个SB8F

在对传感器盒进行编程之前，聊城真空泵，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，防爆真空泵，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，真空泵配件，启用了输出。黄灯（STORED）指示启用输出。

Before programming the sensor box， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for  3 seconds until the READING red light starts fashing， then release it.The  red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).

吸盘/硅氧烷

VG.BC40S 硅氧烷多波纹管吸盘

? 适用于处理装有易碎品的袋子和装有液体和冷冻食品的袋子

? 坚固的波纹管，柔软灵活的唇口和特殊的高流量配件

? 带 4.5 波纹管的版本

? 它们能补偿真空度差异

技术数据

材料 SIL 40

体积 14cm3

zui小曲线半径22mm

zui大垂直移动距离20mm

 吸盘质量10g