夹具作用-鹤壁夹具-吉玛泰克自动化工程

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，夹具是什么，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.

传感器

磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此，夹具作用，大量的磁性材料和强烈的磁场可能会造成传感问题。

The operating position is detected by proximity magnetic sensors

(optional) through a magnet p1aced on the piston.

Therefore，夹具公司， avoid using the gripper in the vicinity of intense

magnetic ffelds or near a large mass of ferromagnetic material

as this may cause detection errors.

双钳口平行自动校准气动夹具GS系列

? 双动作。

? 侧隙专i利调节系统。

? 寿命长，鹤壁夹具，可靠性强，免维护。

? 不同的紧固选项。

? 可选的类磁传感器。

? 弹簧关闭(-NC) 或弹簧打开(-NO)选项。

? FDA-H1 食品级润滑脂。

? Double acting.

? Exclusive backlash adjusting system.

? Long life and reliability， maintenance free.

? Various opti0ns for fastening.

? Optional proximity magnetic sensors.

? Spring closed (-NC) or spring open (-NO) option.

? FDA-H1 food-grade grease.