旋转装置-常熟吉玛泰克自动化-手动旋转装置

真空泵 / EJ-SLG

EJ-SLG-LARGE

? 适用于集中应用

? 多个安装选项使安装和定位更容易

? G1/2' 真空端口

? 集成消音qi

? 多重真空连接

? 预装有 VACSW-3N203-G (PNP) 和 VACSW-3M203-G (NPN) 真空开关

? 提供双级和三级 EJ-LARGE 盒（EJ-LP、EJ-HF 和 EJ-HV）

典型应用

? 食品和制药行业的包装机

? 需要低重量和紧凑尺寸的情况（PKM-Delta 机器人）

? 需要高吸气流速的木材工业机器

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，手动旋转装置，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，旋转装置， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).