吉玛泰克(图)-抓持器型材-石家庄抓持器

编程单个SB8F

在对传感器盒进行编程之前，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，启用了输出。黄灯（STORED）指示启用输出。

Before programming the sensor box，石家庄抓持器， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for  3 seconds until the READING red light starts fashing，三爪抓持器， then release it.The  red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).

带有 3 个颚式钳的自动定心气动抓持器（SXT 系列）

?双动作 (可按需关闭)。

?高夹紧力。

?防护等级为IP67。

?列柱向上采用双层O型圈设计。

?适用于恶劣的环境。

?可选的磁传感器。

?FDA-H1 食品级润滑脂。

?Double acting (normally closed on request).

?Strong gripping force.

?Protection class: IP67.

?Double O-Ring sealing on the columns.

?Suitable for harsh environments.

?Optional magnetic sensors.

?FDA-H1 food-grade grease.

介质压缩空气符合 ISO 8573-1:2010 [7:4:4]

GIMATIC是一家为工业自动化提供气动、电动夹具（尤其是整套EOAT解决方案）的制造商，单指抓持器，产品销量多年来在欧洲乃至全i球范围内都很领i先，抓持器型材，在夹具制造业拥有世界i领i先水平的技术

双钳口自动对准平行i气动钳夹 (PE系列)

? 双动作(PE-25和PE-45可按要求单动作)。

? 高i性能，高可靠性。

? 不同行程的多种选择。

? 在整个行程中，夹紧力是不变的。

? 合金结构实现它的轻重量。

? FDA-H1 食品级润滑脂。

2-jaw parallel self-centering pneumatic gripper

(series PE)

? Double acting (single acting upon request for PE-25...

and PE-45...).

? High efficiency and reliability due to the lack of driving parts.

? Wide choice of stroke length options.

? The gripping force is constant on both directions along total

stroke.

? Light weight; due to its alloy construction.

? FDA-H1 food-grade grease.