运城真空泵-吉玛泰克自动化-真空泵排名

吸盘/ NBR-HNBR

VG.LB33 NBR-HNBR 波纹管吸盘

? 适用于搬运塑料零部件

? 适用于表面平坦或轻微弯曲的物体

? 它们能补偿高度的差异

? 是翻转和拾取薄金属板、玻璃板、刨花板或压制木板、塑料层压板的理想选择

? HNBR 版本可在高温下工作，而硅氧烷或其他混合物版本可能会释放出微量的物质。

适用于必须避免材料污染的应用 [PWIS（水性油漆干扰物）]

? HNBR 化合物坚固耐磨，适用于从相关模具中取出热塑料零部件

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，真空泵销售，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，运城真空泵， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT，真空泵排名， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould，真空泵原理， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.