芜湖真空泵-真空泵厂家-吉玛泰克(推荐商家)

编程单个SB8F

在对传感器盒进行编程之前，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，启用了输出。黄灯（STORED）指示启用输出。

Before programming the sensor box， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for  3 seconds until the READING red light starts fashing， then release it.The  red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).

双钳口自动对准平行i气动钳夹 (PE系列)

? 双动作(PE-25和PE-45可按要求单动作)。

? 高i性能，高可靠性。

? 不同行程的多种选择。

? 在整个行程中，夹紧力是不变的。

? 合金结构实现它的轻重量。

? FDA-H1 食品级润滑脂。

2-jaw parallel self-centering pneumatic gripper

(series PE)

? Double acting (single acting upon request for PE-25...

and PE-45...).

? High efficiency and reliability due to the lack of driving parts.

? Wide choice of stroke length options.

? The gripping force is constant on both directions along total

stroke.

? Light weight; due to its alloy construction.

? FDA-H1 food-grade grease.

可选的推进器

这个配件可安装在TH钳夹上，用推进力F在钳夹打开时保持负载。例如，芜湖真空泵，卡盘夹紧设备时载重。

This accessory can be installed in the TH grippers，真空泵厂家， to hold thepayload during the gripper release， by a pushing force F.

As an example， when the chuck of a machining equipment isloaded.