吉玛泰克(图)-气动软体抓持器-聊城抓持器

编程单个SB8F

在对传感器盒进行编程之前，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，聊城抓持器，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，启用了输出。黄灯（STORED）指示启用输出。

Before programming the sensor box，气动抓持器图片， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for  3 seconds until the READING red light starts fashing， then release it.The  red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).

真空泵 / EJ-BA

EJ-BA-MEDIUMX2

? 非常适合分散应用

? 吸气流速和压缩空气消耗量之间的比率高

? 可以集成在夹持点附近，气动软体抓持器，质量轻

? G3/8' 真空端口

? 辅助真空端口，用于 G1/8' 系统的可能吹扫或监控

? 提供双级和三级 EJ-MEDIUM 盒（EJ-LP、EJ-HF 和 EJ-HV）

应用示例

典型应用

? 搬运密封件，如玻璃和金属部件 (EJ-HV)

? 包装（装箱机、纸箱包装机）（EJ-HF、EJ-LP）

? 塑料（模塑）

? 自动、

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.