机器人抓手快换-吉玛泰克(在线咨询)-牡丹江机器人抓手

带有 3 个颚式钳的自动定心气动抓持器（TH 系列）

?双动作，牡丹江机器人抓手，带可选弹簧（一般关闭或者一般开启） (3)。

?长行程或者短行程(1)。

?可通过螺丝紧固在前面(2)。

?高i效率的传动装置(1)。

?可选的类磁感传感器。

?FDA-H1 食品级润滑脂.

?Double acting with optional springs (normally closed or normally open) (3).

?Long stroke or short stroke (1).

?Possibility of front fastening with through screws (2).

?High efffciency force transmission (1).

?Optional magnetic or inductive sensors.

?FDA-H1 food-grade grease.

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.