气动软体抓持器-绥化抓持器-吉玛泰克

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，气动软体抓持器，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

吸盘/符合 FDA 标准的硅氧烷

VG.FO33F 扁平吸盘，采用符合 FDA 标准的硅氧烷材质制造，绥化抓持器，带有加强件和薄唇口

? 适用于打开袋子和处理薄而精致的物品，例如板和薄膜

? 内部纹理和薄唇口可防止损坏处理的物品，同时保持其平整度

? 吸盘由 FDA 批准的透明硅氧烷制成

技术数据

材料SIL 50 FDA

在不同真空度下与表面垂直的提升力 [N]-20 kPa -60 kPa -90 kPa  16.2 38.3 49.2

在不同真空度下与表面平行的提升力 [N]-20 kPa -60 kPa -90 kPa  13 30 39

体积  2.1 [cm3]

zui小曲线半径 35

zui大垂直移动距离1.5

吸盘质量5