快速切换器原理-快速切换器-常熟吉玛泰克自动化(查看)

SB系列传感器接线盒

? 用于EOAT上传感器接线。? 可以转换PNP和NPN信号。? Is/Os可以是拉电流（PNP）、灌电流（NPN）或干触点。? 可以串联多个盒子来控制更多传感器。? 输入信号重复LED，快速切换器，便于排除故障（不适用于SB15）。? 提供应变消除装置和固定至型材的套件。

Connection boxes for series SB sensors? Used for sensor wiring on EOATs.? PNP and NPN signals can be converted.? Is/Os can be current sourcing (PNP)， sinking (NPN) or dry contact

Several boxes can be connected in series to control more sensors

Input signal repetition LED for easy troubleshooting  (not for SB15).

Provided with strain reliefs and kit for fastening to profles.

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，夹具快速切换器，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT，快速切换器原理， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

双钳口自动校准平行i气动钳夹(SZ系列)

?双作用。

?弹簧关闭；如需要时弹簧打开 。

?多种的紧固和输送选项。

?可选的磁传感器。

?FDA-H1 食品级润滑脂。

?不锈钢颚式钳。

?Double acting.

?Available with normally closed or normally open spring on

request.

?Various options for fastening and feeding.

?Optional magnetic sensors.

?FDA-H1 food-grade grease.

?Stainless steel jaws.