气动旋转装置-旋转装置-苏州吉玛泰克

传感器

磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此，大量的磁性材料和强烈的磁场可能会造成传感问题。

The operating position is detected by proximity magnetic sensors

(optional) through a magnet p1aced on the piston.

Therefore， avoid using the gripper in the vicinity of intense

magnetic ffelds or near a large mass of ferromagnetic material

as this may cause detection errors.

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，旋转装置，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.

双钳口自动校准平行i气动夹具(SGP-S系列)

?双动作。

?反冲调整系统。

?小尺寸高i性能。

?紧固的构造使其非常适合重型作业的运用，使用寿命长，免维护。

?不同的紧固和输送选项。

?随时用于 PRO-SN…HS (1) 可编程磁性传感器。

?食物级润滑油FDA-H1。

Double acting.? Backlash adjusting system.? High performance in small dimensions.? The rugged construction lends itself to heavy duty applicationsfor a trouble free long life without maintenance.

Various fastening and air feeding options.? Ready for PRO-SN …HS (1) programmable magnetic sensor.? Food grade grease FDA-H1.